I have recently had a couple Club Members ask me for the files I used to create the tool paths for my CNC Cut wooden leg pieces. These pieces are NOT the ones used in my T3x Build… I cut those legs out before I have finished building my CNC Machine.
I was asked recently about releasing Drawings and Files from this project. Although I am modeling most of my parts myself and the drawings are my own creation, they are based in a large part on Specs and Drawings that belong to the R2 Builders Club and I want to be careful about how I share some of this. The R6 dome, however, is my own design. Again, this is certainly built upon info found through the Builders Club, but I also used a number of freely available reference images and I feel that I can release the drawings without any worry.